新闻资讯

污泥烘干机加热温度与风速之间的关系!

2019-05-21 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
众所周知,各种污泥枯燥设备,当我们关注污泥烘干机设备时,我们更多地理解污泥烘干机的大小和数量。 气缸的加热和稳定性控制十分忙碌。 与大多数污泥烘干机一样,污泥烘干机的消费需求沸腾炉的严密配合以确保枯燥所需的温度。 那么运用污泥烘干机时加热温度与风速之间的关系是什么?真空烘干机厂家小编带大家了解下
  As we all know, when we pay attention to the equipment of sludge dryer, we understand more about the size and quantity of sludge dryer. Cylinder heating and stability control is very busy. Like most sludge dryers, the consumption of sludge dryers requires close coordination of fluidized bed furnaces to ensure the temperature required for drying. So what is the relationship between heating temperature and wind speed when using sludge dryer? Vacuum dryer manufacturer knitting you know
  供气量:1当风门不挪动且风量自动减小时,气室压力自动变大。 假如是这种状况,则煤颗粒太大或资料层变厚。 当发作这种状况时,应排出炉渣并均衡风量;  2当煤炭供给量为值时,能够改动供气量以维持正常运转。 在这种状况下,当温度降落时,能够恰当地减小空气量。 否则,应恰当增加风量,也可调理煤量控制。 温度,但加热功率随供给的煤量而变化。 此时,风量应及时匹配,以防止结焦。
  Air supply: 1. When the throttle does not move and the air flow automatically decreases, the chamber pressure automatically increases. If this is the case, the coal particles are too large or the data layer becomes thicker. When this happens, the slag should be discharged and the air flow should be balanced; 2. When the coal supply is in value, the air supply can be changed to maintain normal operation. In this case, when the temperature drops, the air volume can be reduced appropriately. Otherwise, the air volume should be increased appropriately, and the coal volume can be adjusted and controlled. Temperature, but heating power varies with the amount of coal supplied. At this time, the air volume should be matched in time to prevent coking.
真空烘干机厂家
  资料层温度:在操作过程中,资料层的温度应控制在正常工作温度范围内。 为了使熄灭尽可能快速和完整,烟煤易于熄灭,资料层的温度能够控制在850℃。 只要正确控制枯燥设备所需的温度,才干确保资料产品不是焦化湖,不结焦,高产,这被以为是高性能的电镀污泥枯燥设备。
  Data layer temperature: During operation, the temperature of data layer should be controlled in the normal working temperature range. In order to extinguish as fast and complete as possible, bituminous coal is easy to extinguish, and the temperature of data layer can be controlled at 850 C. Only by correctly controlling the temperature required for the drying equipment can we ensure that the data products are not coking lake, not coking, high yield, which is considered to be a high-performance plating sludge drying equipment.
  更多的相关内容可以点击我们的官网进行咨询:http://www.zhongyanjixie.com
  For more information, please click on our website: http://www.zhongyanjixie.com
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: