新闻资讯

烘干机试用期要注意什么?

2019-05-08 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
辣椒烘干机进入正常的工作前都会有一段的适应期(磨合期,一般为3天),这个时期是确保烘干机在正式的生产过程中能够正常的工作运转,大程度的减少烘干机出现事故的几率,在适应期内正确的操作则能延长烘干机的使用寿命,所以一定要注意这个时期各个操作的细节。
  Before the chili dryer enters the normal work, there will be a period of adaptation (running-in period, usually 3 days). This period is to ensure that the dryer can work normally in the formal production process, to minimize the probability of accidents of the dryer, and correct operation during the adaptation period can prolong the life of the dryer, so we must pay attention to each period. Details of the operation.
  一、在适应期开始前烘干机的操作者应该接受生产厂家关于烘干机的构造、操作、不同的性能、日常问题的解决方面严格的培训,并且熟悉煤泥烘干机的说明书。
  1. Before the beginning of the adaptation period, the operator of the dryer should receive strict training from the manufacturer on the structure, operation, different performance and solution of daily problems of the dryer, and be familiar with the instructions of the slime dryer.
  二、在适应期内应注意的是要注意时常对烘干机的起到润滑、冷却、制动等进行检查,并且也要检查烘干机各个需要密闭的部件的密封性是否完好;操作人员对烘干机的熟练程度在操作烘干机时也会对烘干机造成影响,接受培训后的人员应该按照说明进行正确的操作、保养;保证烘干机的工作负荷不超过额定的80%,另外工作量要适宜不能使烘干机过长时间作业引发过热现象。
真空烘干机厂家
  2. During the adaptation period, attention should be paid to check the lubrication, cooling and braking of the dryer from time to time, and to check whether the sealing of the various parts of the dryer that need to be sealed is intact; the proficiency of the operator in operating the dryer will also affect the dryer, and the trained personnel should operate the dryer correctly according to the instructions. Make and maintain; ensure that the workload of the dryer does not exceed 80% of the rated, and the workload should be appropriate so as not to cause the overheating of the dryer after too long operation.
  三、在适应期结束后提醒您应该强迫烘干机设备进行维护保养,对各个设备进行检查以及所需进行的一切调换工作;烘干机设备要保持清洁,各个部件防止松动,减少松动带来的磨损或零件丢失。
  3. At the end of the adaptation period, remind you that you should force the dryer equipment to be maintained, inspected and replaced; the dryer equipment should be kept clean, the parts should be prevented from loosening, and the wear and tear caused by loosening or the loss of parts should be reduced.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: