新闻资讯

怎么有效降低热风炉的腐蚀程度?

2019-04-26 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
以下是怎么能够有效的降低热水热风炉的腐蚀程度的详解,希望下面的介绍能带给大家更多的帮助!在热水热风炉的系统中布置排气装置排气装置的安装,有利于排除热水热风炉热水系统中空气和由于加热从水中析出的气体,这样一来呢,就减少了氧气的腐蚀。
  The following is how to effectively reduce the corrosion of hot water stove in detail, I hope the following introduction can bring you more help! The installation of exhaust device of exhaust device in hot-water hot-blast stove system is conducive to excluding air and gas from water due to heating in hot-water hot-blast stove hot-water system, thus reducing the corrosion of oxygen.
  随着不可再生资源日益减少,能源价格飞速上涨,节能环保才是各行各业发展的前提,一切污染环境,随意使用不可再生资源的生产都是不被允许的。“十二五”规划以来,建设资源节约,环境友好的口号被提出,热风炉市场的发展势必从粗放型发展逐渐向节能环保方面极速靠近。
  With the decrease of non-renewable resources and the rapid rise of energy prices, energy conservation and environmental protection are the prerequisites for the development of all walks of life. All pollution of the environment and the production of non-renewable resources are not allowed. Since the 12th Five-Year Plan, the slogan of building resource-saving and environment-friendly has been put forward. The development of hot blast stove market is bound to move from extensive development to energy-saving and environmental protection.
热风炉生产厂家
  在传统老式的燃煤热风炉技术有限的情况下,生产过程中废渣、废气、废水三废俱全,是耗能污染大户并且治理困难。这些老式燃煤必将逐渐被新型能源技术的环保热风炉所取代。新型环保热风炉坚持从五个方面入手,化劣势为优势,使装置效率得到大限度提升。
  With the limited technology of the traditional coal-fired hot blast stove, waste residue, waste gas and waste water are all available in the production process, which is a big energy-consuming and polluting household and difficult to control. These old-fashioned coal-fired stoves will gradually be replaced by new energy technologies. The new type of environmental protection hot blast stove insists on starting from five aspects, turning inferiority into advantage, so as to maximize the efficiency of the device.
  一、开展降低燃煤单耗小指标竞赛。
  1. Carry out small index competitions to reduce coal consumption.
  二、控制热风炉负荷,尽可能避免热风炉结焦。
  2. Control the load of hot stove and avoid coking as much as possible.
  三、积极优化热风炉燃烧,降低损失。
  3. Actively optimize the combustion of hot blast stoves to reduce losses.
  四、控制水、汽品质,降低热风炉排污率。
  4. Control the quality of water and steam and reduce the discharge rate of hot blast stove.
  五、及时调整热风炉负荷。
  5. Adjust the load of hot stove in time.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: