新闻资讯

工业烘干机拖轮抖动的原因分析!

2019-04-10 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
  工业烘干机拖轮的主要用来承载回转部位的筒体、扬料板、轮带等的重量,并对筒体的稳定有一定的作用。当拖轮呈现窜动现象时,会影响筒体的正常运转,严重时以至会损坏整个设备。那么,形成拖轮窜动的缘由是什么呢?下面我们详细来看工业烘干机拖轮窜动的缘由。
  The industrial dryer tugboat is mainly used to carry the weight of the cylinder, lifting plate, wheel belt and so on in the rotating part, and has a certain effect on the stability of the cylinder. When the tugboat moves, it will affect the normal operation of the cylinder, and even damage the whole equipment. So, what is the reason for the tugboat to move? Now let's look at the reason why the industrial dryer tugboat moves in detail.
  形成拖轮窜动的缘由有很多种,常见的有两种:
  There are many reasons for tugboat movement, two of which are most common:
  、工业烘干机的拖轮在加工或装置过程中呈现失误,使其轮带、拖轮接触不良,或者点接触,在筒体在运转时,轮带一直对拖轮有一沿轴向的推力,从而形成拖轮窜动。
  First, the industrial dryer's tugboat makes a mistake in the process of processing or installation, which makes the wheel and tugboat contact badly, or point contact. When the cylinder is running, the pulley always has an axial thrust on the tugboat, thus causing the tugboat to move.
木屑烘干机厂家
  第二、工业烘干机的轮带在装置时呈现问题,使轮带与筒体的装置不到位,即轮带与筒体的同轴度以及两轮带平行度未到达设计规则误差范围,形成拖轮窜动。
  Secondly, the wheel belt of industrial dryer presents problems when it is installed, which makes the device of wheel belt and cylinder not in place, that is, the coaxiality of wheel belt and cylinder body and the parallelism of two wheel belts do not reach the error range of design rules, thus forming tugboat channeling.
  从上文能够看出,为保证工业烘干机的正常运转,减少在运转过程中呈现窜动等毛病的几率,在装置过程中要特别留意各部件的装置质量,特别是轮带和拖轮。
  It can be seen from the above that in order to ensure the normal operation of industrial dryers and reduce the chances of occurrence of faults such as movement in the process of operation, special attention should be paid to the device quality of each component, especially the wheels and tugs.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: