新闻资讯

沙子烘干机的磨损方式?

2019-04-08 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
沙子烘干机在运用或闲置过程中均会发作磨损,有些朋友肯定会问沙子烘干机在闲置时怎样会产生磨损呢?其实烘干机磨损有两种方式:有形磨损和无形磨损。
  Sand dryer will wear and tear when it is in use or idle. Some friends will surely ask how the sand dryer will wear and tear when it is idle. In fact, there are two ways of dryer wear: tangible wear and intangible wear.
  惹起有形磨损的主要缘由是消费过程的运用。它的表现是:由于摩擦、振动等现象,机器零部件的原始位置尺寸发作改动;外形和配合性能发作变化;精度境地,零件损坏等。
  The main cause of tangible wear is the use of consumption process. Its manifestations are: due to friction, vibration and other phenomena, the original position and size of machine parts have changed; the shape and coordination performance have changed; the precision situation, parts damage and so on.
  无形磨损也称经济磨损。形成无形磨损的缘由,一是由于劳动消费率进步,消费同样机器设备所需的社会必要消耗减少,因此原机器设备相应贬值;另外,由于新技术的创造和应用,呈现了性能愈加完善,消费效率更高的机器设备,使原设备的价值相对降低。前者磨损缘由是种无形磨损,后者为第二种无形磨损。
  Invisible wear is also called economic wear. The reasons for invisible wear and tear are as follows: firstly, due to the improvement of labor consumption rate and the reduction of social necessary consumption of the same machine and equipment, the original machine and equipment are depreciated accordingly; secondly, due to the creation and application of new technology, the machine and equipment with better performance and higher consumption efficiency are presented, and the value of the original equipment is reduced relatively. The former is attributed to the first kind of invisible wear, while the latter is attributed to the second kind of invisible wear.
  沙子烘干机在有效运用期内,同时遭受有形磨损和无形磨损的作用,两者均惹起机器设备原始价值的贬低,这种磨损称“综合磨损”。但有形磨损严重的机器设备在修理之前常常不能工作,而无形磨损严重的设备却仍可运用,只是其劳动消耗高,经济效果差。假使机器的有形磨损和无形磨损期接近。
木屑烘干机厂家
  Sand dryer suffers both tangible and intangible wear during its effective operation period, which leads to the depreciation of the original value of machinery and equipment. This kind of wear is called "comprehensive wear". However, the machine and equipment with serious tangible wear often can not work before repairing, while the equipment with serious tangible wear can still be used, but its labor consumption is high and its economic effect is poor. If the tangible wear and intangible wear period of the machine are close to each other.
  当设备需求大修时,正好呈现了效率更高的新设备,这时,就不需求大修理,用新设备改换同时遭受两种磨损的旧设备。若设备虽已严重有形磨损,无形磨损期还未到来,则对原设备停止大修理,或者改换类似设备即可。假使无形磨损期早于有形磨损期,是继续运用原设备还是用先进设备改换,就要停止经济剖析。
  When the equipment needs to be overhauled, new equipment with higher efficiency appears. At this time, there is no need for overhaul, and old equipment which suffers two kinds of wear and tear is replaced with new equipment. If the equipment has been seriously tangible wear and the intangible wear period has not yet arrived, the original equipment should be stopped overhauling or replaced with similar equipment. If the intangible wear period is earlier than the tangible wear period, whether to continue using the original equipment or to replace it with advanced equipment, we must stop economic analysis.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: