新闻资讯

烘干机全面的解决方案!

2019-03-21 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
带式保送机的消费才能大保送间隔长,调速范围广,动力耗费低,高速无噪音,而且构造简单,工作牢靠,运用便当,维修容易,井能在全机身任何位置卸科。但是它普通只能作直线保送,对粘湿性物料易于粘带,保送轻质粉状勘辩时身发作粉尘飞扬,对保送1顷角大于30。时不能运用。带式保送机不只能够用来保送散粒块和粉轶物科,如谷物、果蔬、饼干、糖果等,还能够保送成件的物品,如瓶罐,包装箱等。
  Belt-type escort machine can consume a lot of energy, such as long escort interval, wide speed range, low power consumption, high speed and no noise, simple structure, reliable work, convenient operation, easy maintenance, and well can be discharged from any position in the whole fuselage. However, it can only be used as a straight-line escort. It is easy to stick to viscous and wet materials. When escorting light powder defense, dust is flying, and the angle of one hectare is more than 30. It can't be used at any time. Belt-type delivery machine can not only be used to deliver bulk grains and anecdotes, such as grains, fruits and vegetables, biscuits, candies, etc., but also to deliver finished goods, such as bottles and cans, packing boxes, etc.
  带式保送机在运用和维护中要留意.
  Attention should be paid to the use and maintenance of belt-type escort machine.
  (1)工作前,应检查各传动局部,特刖是驱动滚筒及托辊。要使它们灵敏运转,井加足润精油。
  (1) Before working, the driving parts should be inspected, especially the driving drum and idler. To make them operate sensitively, add enough moisturizing essential oil to the well.
  (2)保送带的运转方向应与驱动滚筒和托辊垂直,井使保送带睐持遣当的橙紧度,不能使保送带下垂超越托辊间距的2rS%。工作时要随时留意调整张紧机构。
  (2) The running direction of the belt should be perpendicular to the driving drum and the idler. The well can make the belt keep its orange tightness, and can not make the belt sag beyond 2rS of the idler spacing. Always pay attention to adjusting the tensioning mechanism when working.
木屑烘干机厂家
  ( 3)保送带的速度要依据被运物料的粒度、坚硬度以厦进料和卸料的方式来选取,有时还要经过实验来肯定。
  (3) The speed of the belts should be determined by the grain size and hardness of the materials to be transported in the way of loading and unloading, sometimes through experiments.
  (4)在保送轻质粉状物料时,要尽力减少粉尘飞扬,并要留意传动部件的密封。既要避免粉尘侵入转动部值,又要避免光滑油的流出而污染物科。
  (4) When delivering light powder materials, we should try our best to reduce dust flying, and pay attention to the sealing of transmission parts. It is necessary not only to avoid dust intrusion into the rotating part value, but also to avoid smooth oil outflow and contamination.
  (5)工作时,先要空载运转,井留意察看机器的工作状况,待正常前方能加料。
  (5) When working, the first thing is to run without load. The well should pay attention to the working condition of the machine and feed before normal operation.
  (6)要留意加料的平均性,切忌过载。由于过载会使皮带打滑。物料A zCz或太牯也不氨采用带式保送机。
  (6) Pay attention to the average of feeding and avoid overloading. The belt will slip because of overload. The material A zCz or Taiyun does not use belt conveyor for ammonia.
  (7)上作完毕时,应先中止供料,待保送带上的物料卸空前方能停机,并清洁保送带和机件,以备下次再用。
  (7) When the above work is finished, the feeding should be stopped first, and the machine can stop before the material on the delivery belt is unloaded unprecedentedly, and the delivery belt and the parts should be cleaned for the next use.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: