新闻资讯

煤泥烘干机出现噪音大问题怎么解决?

2019-03-19 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
  关于像煤泥烘干机这样的大型设备来说,发作噪音是很正常的事情,但是假如噪音过大那就不正常了,能够是机器呈现了问题,这时你就需求和烘干机消费厂家联络来处理噪音问题了。煤泥烘干机用户较多,今天我公司技术部就以煤泥烘干机为例为大家解说一下烘干机设备常见的噪音大的问题以及如何处理。
  It's normal for large equipment like slime dryer to make noise, but if the noise is too big, it's not normal. It can be a problem for the machine. Then you need to contact the dryer consumer to deal with the noise problem. There are many users of slime dryer. Today, the technical department of our company takes the slime dryer as an example to explain the common noise problems of the dryer equipment and how to deal with them.
  可能形成煤泥烘干机噪音过大的缘由有以下四点:
  There are four possible reasons for the excessive noise of the slime dryer:
  a、工件放置不平均。
  A. uneven placement of workpieces.
  b、烘干机装置不稳。
  B. The dryer is unstable.
  c、轴承失油或破损。
  C. Bearing oil loss or damage.
  d、轴承座固定螺栓松动。
  D. Loose fixed bolt of bearing seat.
  找到煤泥烘干机发作噪音的缘由,就晓得煤泥烘干机噪音大要怎样处理了,以上问题的对应处理方法是:
  Find out the reason why the noise of the slime dryer occurs, and know how to deal with the noise of the slime dryer. The corresponding treatment methods of the above problems are as follows:
  1、停机并将工件放置平均。
  1. Stop the machine and average the workpiece.
  2、重新装置平稳烘干机设备。
  2. Re-install smooth dryer equipment.
  3、改换烘干机设备的轴承。
  3. Change the bearing of dryer equipment.
  4、将轴承座固定螺栓统筹。
  4. Make the fixed bolts of the bearing seat as a whole.
真空烘干机厂家
  煤泥烘干机在工作前的检测请求引见
  Introduction to Detection Request of Slurry Dryer before Work
  1、煤泥烘干机在工作前的检测请求和条件。丈量目的、被测物理量选择、丈量范围、输入信号大值和频带宽度、丈量精度请求、丈量所需时间请求等。
  1. Requirements and conditions for detection of slime dryer before operation. The purpose of measurement, the selection of physical measurement to be measured, the measurement range, the maximum value of input signal and the width of frequency band, the requirement of measurement accuracy, the requirement of time needed for measurement, etc.
  2、传感器性能。精度、稳定性、响应速度、输出量性质、埘被测物体产生的负载效应、校正周期、输入端维护等。
  2. Sensor performance. Precision, stability, response speed, output property, load effect, correction period, input maintenance and so on.
  3、运用条件。装置条件、工作场地的环境条件(温度、湿度、振动等)、丈量时间、所需煤泥烘干机功率容量、与其它设备的衔接、备件与维修效劳等。
  3. Conditions of application. Equipment conditions, working site environmental conditions (temperature, humidity, vibration, etc.), measuring time, required power capacity of slime dryer, connection with other equipment, spare parts and maintenance services, etc.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: