新闻资讯

我们应该怎么配置热风炉?

2019-03-13 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
经过多年深入研究,在原基础上改用翅片式热传导技术,我公司生产的粮食烘干机专用热风炉具有能耗低,热传导效率高,外形美观,使用寿命长,价格实惠等特点。
  After years of in-depth research, on the basis of the original fin-type heat transfer technology, the special hot air stove for grain dryer produced by our company has the characteristics of low energy consumption, high heat transfer efficiency, beautiful appearance, long service life and affordable price.
  热风炉是粮食烘干机的主要配件之一,好的热风炉对粮食烘干机起到的作用是不一样的,不管用什么耐火材料砌筑的粮食烘干机热风炉,使用前都要进行烘炉,可见热风炉的作用是很大的,那么我们如何配置热风炉呢?
  Hot-blast stove is one of the main parts of grain dryer. Good hot-blast stove plays different roles in grain dryer. No matter what refractory material is used to build grain dryer hot-blast stove, it must be baked before use. It can be seen that the role of hot-blast stove is great. So how do we configure hot-blast stove?
  一、粮食烘干机配套热风炉的布风板应用20毫米厚的钢板钻孔制成,用螺栓固定在炉框下。风帽之间的空隙应填厚度60毫米左右的耐热混凝土。
  1. The air distribution plate of the hot blast stove matched with the grain dryer is made by drilling 20 mm thick steel plate, and is fixed under the furnace frame with bolts. The gap between air caps should be filled with heat-resistant concrete with a thickness of about 60 mm.
  二、粮食烘干机配套热风炉的炉门有效尺寸以40*50毫米为^佳。炉门中心与炉床距离一般为90~100毫米。炉门上方应设有观察门,以便操作工在控制室直接观察炉内燃烧缺口,及时调节喂煤量与鼓风量。
热风炉生产厂家
  2. The effective size of the door of the hot blast stove matched with grain dryer should be 40*50mm. The distance between the center of the furnace door and the furnace bed is generally 90-100 mm. There should be an observation door above the furnace door so that the operator can directly observe the burning gap in the furnace in the control room and timely adjust the coal feeding and blast volume.
  三、为时刻监控进入粮食烘干机的热风温度,应在粮食烘干机进料口处装一个热电偶,测温范围为0~10℃。
  3. In order to monitor the hot air temperature entering the grain dryer at any time, a thermocouple should be installed at the inlet and outlet of the grain dryer, and the temperature measurement range is 0-10 C.
  四、当粮食烘干机进行顺流烘干作业时,进料口应设在热风炉炉顶上,出料口位置应视干料的运输方向而定,热风炉的炉门框应放置在炉体外砖墙的混凝土梁上。
  4. When the grain dryer dries along the stream, the inlet and outlet should be located on the top of the hot blast stove. The outlet position should depend on the direction of dry material transportation. The door frame of the hot blast stove should be placed on the concrete beam of the brick wall outside the stove.
  以上内容由热风炉生产厂家整理发布,更多相关资讯可以点击我们的官网进行资讯:http://www.zhongyanjixie.com
  More information can be obtained by clicking on our website: http://www.zhongyanjixie.com.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: