新闻资讯

怎么减小木屑烘干机制造误差?

2019-09-10 来源:http://www.zhongyanjixie.com 发布人:admin 浏览量:
  锯末烘干机生产过程中会有一定的误差,如果误差在安全范围内,不会影响设备的操作,如果误差超过安全范围,不仅影响设备的正常运行,也影响干燥效率、使用寿命等方面,安全不能保证,有隐患。
  There will be some errors in the production process of sawdust dryer. If the errors are within the safe range, they will not affect the operation of the equipment. If the errors exceed the safe range, they will not only affect the normal operation of the equipment, but also affect the drying efficiency and service life. Safety can not be guaranteed and there are hidden dangers.
  作为锯末干燥机的制造商,本公司一直在不断提高设备性能,使误差减小到小范围。
  As a manufacturer of sawdust dryer, Wantai has been continuously improving equipment performance to minimize errors.
  减少设计的影响
  Reduce the impact of design
  锯末干燥机在制造前需要经过严格的设计,设计的合理性直接影响设备制造过程中误差的大小。如你所知,锯末干燥机是由各个部件组成的,为了减少误差,每个部件都要配合得很好,所以设计过程中每个部件的尺寸都要准确。研发人员针对设备在运行过程中的弯曲变形、振动、开裂等问题也进行了改进,提高了设备的抗压性能,延长了设备的使用寿命。
  Sawdust dryer needs to undergo strict design before manufacturing. The rationality of design directly affects the error in the manufacturing process of equipment. As you know, sawdust dryer is made up of various parts. In order to reduce errors, each part should cooperate well, so the size of each part should be accurate in the design process. Wantai R&D personnel have also improved the bending deformation, vibration, cracking and other problems of the equipment during operation, which has improved the compressive performance of the equipment and prolonged the service life of the equipment.
  减少设备生产误差
  Reducing Equipment Production Errors
木屑烘干机厂家
  锯末干燥机产生误差的主要原因是生产设备的影响。许多生产厂家不规范的设备出现误差,主要原因是生产设备不规范,造成设备尺寸、质量、直径等误差。所谓“磨刀不误砍柴工”,没有好的生产设备怎么能生产出高品质的木材烘干机呢?因此万泰引进国外先进的生产设备,减少了生产过程中的制造误差。
  The main reason for the error of sawdust dryer is the influence of production equipment. Many manufacturers have errors in non-standard equipment, the main reason is that the production equipment is not standardized, resulting in equipment size, quality, diameter and other errors. How can we produce high-quality wood dryers without good production equipment? Therefore, Wantai introduced advanced production equipment from abroad to reduce manufacturing errors in the production process.
  标准设备测试
  Standard Equipment Testing
  无论设备设计得多好,在制造过程中都会存在一些非电阻因素,导致设备出现误差。此时,对设备的检查必须标准化。为了减少锯末干燥机的制造误差,万泰成立了专门的测试团队对设备误差进行测试。一旦零件不符合要求,它将回到工厂生产新的。必须把设备误差降到低。
  No matter how well the equipment is designed, there will be some non-resistance factors in the manufacturing process, resulting in errors in the equipment. At this time, the inspection of equipment must be standardized. In order to reduce the manufacturing error of sawdust dryer, Wantai set up a special testing team to test the equipment error. Once the parts do not meet the requirements, it will return to the factory to produce new ones. Equipment error must be minimized.
返回顶部

版权所有©山东众焱机械有限公司 备案号:鲁ICP备19005667号-1 服务热线:18005415007 流量统计: